Building a Scene with Masking (Winnie & Walter Leading Lady #3)

Hello everyone!

This is my second blog post today – if you are looking for the card I made as a guest for Challenge Up Your Life you’ll find it here.


But now I am thrilled to bring you my third post as Winnie & Walter‘sΒ Leading Lady!

winnie_walter_leading_lady_rosali_february2019

I will show you another masking technique, and this one is really easy! But you can also make the most of it and take it to another level – which then needs a little more planning. I made two cards to show you an easier and a more elaborate way to:

BUILD A SCENE USING MASKING

So let’s get started with a clean and simple (CAS) card design using this technique. I picked a cute bird image from the So Tweet with Evelin T Designs stamp set as my focal point and the Mini Scenery: Into the Woods stamp set to create a background for the birdie.

Building a stamped scene with Masking - Winnie and Walter 1

Here is how the masking works:

  1. Stamp the bird onto your cardstock panel where you want him to be.
  2. Stamp the bird image a second time, this time on masking paper / a piece of removable label and use scissors to cut the image out right on the outer stamping line. You don’t need to mask the feet so you can just cut them off.
  3. Place the mask directly over the stamped image on your panel.
  4. It’s best to use a stamp positioner or stamping tool of some kind for the next step. Align the bottom of the tree scenery stamp with the bird’s feet and stamp it down really well so the ink reaches right to the edges of the mask.
  5. Stamp several times with the ink colors that you like until you are happy with the ink coverage and colors.

I used a light blue ink for the largest part (sky) and fir green ink for the bottom (forest floor). It didn’t stamp completely solid (I later discovered I had some air bubbles under my stamp) but I actually liked the texture the ink gave my ‘sky’ so I left it as is and embraced the look by adding even more texture with tiny black splatters. πŸ™‚

Building a stamped scene with Masking - Winnie and Walter 2

COLORING TIPS

TIP 1: I added a little bit of shading to the white birch trees using colored pencils to give them a more three-dimensional look.

TIP 2: For the birdie, I used first Copics (Y08, R27, R29, R39) and then colored pencils on top! I call this method ‘two step coloring’ and it’s one of my favorite ways to color because it takes less patience than using just colored pencils!

TIP 3: I like to use a black Glaze pen from Sakura for the critter’s eyes to make them pop. You can also use a basic black gel pen or even Ebony Black Nuvo Drops in a fine tip bottle!

SENTIMENT

The sentiment is a combination of stamps from So Tweet with Evelin T Designs (“my tweet”) and Yetitide Greetings with Evelin T Designs (white heat embossed “LOVE”). Lastly, I added a strip of white cardstock that I had die cut with the biggest rectangle dies from the Tilda Cutaways.

For my second card, I masked several images to build a scene:

Building a stamped scene with Masking - Winnie and Walter 3

Isn’t this such a cute group of dogs?! I had a blast coloring them. πŸ™‚

The masking technique is generally the same as above! You just have to:

  • plan ahead where you want to place all the dogs and
  • which images you have to stamp first and mask.

I like to lay all the stamps onto my piece of cardstock and decide where they should go and which images I want to be up front and which I want to be behind others. The images that you want to be up front have to be stamped first! In my case, it’s the smallest two dogs (the second one to the left and the far right one).

I stamped those two dog images using my stamping tool, masked them and then placed the next stamps onto the panel. This time the poodle and his friend were to be stamped and masked. After that, the remaining three dogs (which I interpreted as two huskys and a Saint Bernard dog) could be stamped. That made my dogs complete! I colored them all in using watercolor markers and a water brush.

COLORING CLOSE-UP:

Building a stamped scene with Masking - Winnie and Walter 4

WATERCOLOR TIPS

TIP 4: When you took too much pigment to your paper dab it off with a paper towel to preserve the lightest spot on your coloring.

TIP 5: To get a smooth blend on the background put down a wash of clean water on your paper FIRST where the color should go, THEN apply the marker/pigment to your paper and drag it out with your brush. The paper should be damp, not pooling with water. It’s easier to avoid harsh lines this way.

SENTIMENT

On this card, the sentiment is a combination of stamps and a die: “From all of us” is from Big Hugs with Evelin T Designs and “birthday” from Wishing You with Evelin T Designs. The Happy Cutaway was die cut right into the colored panel and popped up with fun foam.


GIVEAWAY AND CHALLENGES FOR YOU TO JOIN!

As you probably all know by now, Winnie & Walter has generously sponsored a 30 $ gift certificate for one of you to win! πŸ˜€ All you have to do is leave me a comment under this blog post. I’d love to hear what you think about my critter cards!

I will pick a random winner from all four blog posts by the end of February 24th.

β™₯β™₯β™₯β™₯β™₯β™₯β™₯

If you haven’t already make sure to check out Winnie & Walter’s blog. There is not only my blog post waiting for you but also a crafty challenge with a prize to be won! The amazing Shay from Winnie & Walter is adding a challenge under EACH of my Leading Lady posts this month! Wow!

All you have to do is create a card or other papercraft item that uses the weekly masking technique that I have written about and link it up to the blog. I have seen a comment saying they don’t feel like being ‘expert enough’ with the technique to join so I really want to encourage you again and say that all skill levels ARE WELCOME! Everyone was a beginner at some point. πŸ™‚

Winnie & Walter is also celebrating their birthday this month (just like me!) with a couple of other “Birthday Bash challenges” and more prizes! They are super generous.

I look forward to your creations!! Have an amazing day! β™₯

Rosali

Entry for:
https://watercoolerchallenges.blogspot.com/2019/02/wwc208-charlottes-all-about-occasions.html
http://craftstamper.blogspot.com/2019/02/take-it-make-it-challenge-february.html
http://seizethebirthday.blogspot.com/ AG 159

If you like this post, be sure to follow my blog via email or Bloglovin’ (buttons are in the sidebar on the right / down below if you’re on a mobile device). β™₯


USED SUPPLIES:

Winnie & Walter stamps, dies and stencils:

LS Exclusives: So Tweet with Evelin T Designs Stamp Set
Mini Scenery: Into the Woods Stamp Set
Yetitide Greetings with Evelin T Designs Stamp Set + Cutaways
Essentials: Tilda Cutaways
Dog-gone Cute with Evelin T Designs Stamp Set
In a Word: Happy Cutaway
Big Hugs with Evelin T Designs Stamp Set
Wishing You with Evelin T Designs Stamp Set

Ink Pads:

Lawn Fawn – Dye Inks (Moonstone, Noble Fir, Jet Black)
Tsukineko – Versamark Ink
Versafine Clair – Nocturne Black Ink

Paper:

Neenah Solar White (Classic Crest) – 110 lb and 80 lb
Masking Paper (Herma – Repositionable Labels)

Other Supplies BIRD Card:

My Sweet Petunia – MISTI Stamping Tool
Copic Markers + Colored Pencils
Sakura – Glaze 3-D Glossy Ink Pen Black
WOW Embossing – Bright White Embossing Powder (Super Fine)
Tonic Studios – Nuvo Crystal Drops (Ebony Black)
Scotch 3M – Foam Tape

Other Supplies DOGS Card:

Winsor & Newton – Water Colour Markersβ„’
Sakura – Glaze 3-D Glossy Ink Pen Black
Uni-ball – White Gel Pen
White Fun Foam
Corner Rounder Punch

Advertisements

Oxide Ink Card for Challenge Up Your Life

Hello friends!

I am back with my second post as a Guest Designer for Challenge Up Your Life (CUYL) today with a colorful Distress Oxide Ink card featuring Simon Says Stamp and other brands’ products! πŸ™‚

challenge_up_your_life_papercrafts_banner

Theme #106 is:

“CASE the DT”

CASE stands for “Copy and Selectively Edit” here. It basically means that you pick a project from the Design Team and get inspired by it – whether by the design, the technique, the colors or anything else. In your post you mention which crafter and project inspired you.

I CASEd a card from my friend & DT member Maike of Maikreations. When I saw it I immediately fell in love with the vibrant colors she used!

MY INSPIRATION FROM MAIKE:

challenge color inspiration by maikreations

AND HERE’S MY CARD:

oxide ink card with simon says stamp

For the background I used the following Distress Oxide Inks (from top to bottom) and a strip of masking paper:

  • Picked Raspberry
  • Abandoned Coral
  • Wild Honey
  • Salty Ocean
  • Tumbled Glass

The reflection on the water is made with a stencil from Honey Bee Stamps and Distress Stain in Gold / Tarnished Brass. I blended that on with a mini blending tool. Then I added a die cut sailboat and a sentiment, both from Simon Says Stamp (there is a full supply list down below).

Thanks again to the girls from Challenge Up Your Life for having me as a Guest Designer! I am already curious to see which cards they picked as their inspiration!

I am gonna be back later today with my third post as Winnie & Walter’s Leading Lady! πŸ™‚

Rosali β™₯

Entry for:
http://sirstampalotchallenge.blogspot.com/2019/02/february-all-things-bright-and-beautiful.html
https://sweetstamperschallenge.blogspot.com/2019/02/29-stitched-real-or-faux.html

If you like this post, be sure to follow my blog via email or Bloglovin’ (buttons are in the sidebar on the right / down below if you’re on a mobile device). β™₯


USED SUPPLIES:

Stamps & dies:

Simon Says Stamp – Sailboat Wafer Die
Simon Says Stamp – One With Nature Stamp Set
Honey Bee Stamps – Double Stitched Rectangle Dies
Lawn Fawn – Sentiment Banner Dies

Paper:

Neenah Solar White (Classic Crest) – 110 lb and 80 lb
Black & White Patterned Paper (sorry, don’t know which brand)
Masking Paper

Inks:

Ranger / Tim Holtz – Distress Oxide Inks: Picked Raspberry, Abandoned Coral, Wild Honey, Salty Ocean, Tumbled Glass
Versafine – Onyx Black Pigment Ink (sentiment)

Other Supplies:

Ranger / Tim Holtz – Distress Stain: Tarnished Brass
Honey Bee Stamps – Ocean Builder Stencil Set
Washi Tape (Sail)
Glitter Enamel Dots
3M – Foam Tape

Let’s Toast with Lawn Fawn

Hello and welcome back!

I am just quickly saying “hi” today with this interactive card using Lawn Fawn’s Let’s Toast stamps and dies!

POPPIN’ UP TO SAY …

Lawn Fawn Let's Toast CardLawn Fawn Let's Toast Popped Up Card

I combined the Let’s Toast set with a tiny speech bubble die from Rawr! Isn’t that cute?

For the colors, I was inspired by the ongoing Lawnfawnatics challenge. I used pinks and lilac for the background and interpreted the gold-ish brush strokes on the inspirational picture as kraft.

I heat embossed a white heart onto the toaster twice to make it look like some kind of a 3-D logo that you sometimes find on electric devices. I would totally want such a toaster! πŸ˜€ πŸ˜€

Thank you for stopping by. Have an amazing day! β™₯

Rosali
If you like this post, be sure to follow my blog via email or Bloglovin’ (buttons are in the sidebar on the right / down below if you’re on a mobile device). β™₯

Challenge links:

LawnFawnatics_BlogBadge-46-mood-board-challenge


USED SUPPLIES:

Stamps & dies:

Lawn Fawn – Let’s Toast Stamps & Dies and Interactive Pull Tab Add On Dies
Lawn Fawn – Rawr Dies
Lawn Fawn – Reveal Wheel Sentiments Stamps
Lawn Fawn – Everyday Sentiment Banners Dies

Paper:

Neenah Solar White (Classic Crest) – 80 lb
Kraft Cardbase
Lawn Fawn – Really Rainbow 6×6 Paper Pad

Inks:

Lawn Fawn – Peachy Keen, Jet Black Ink
Versafine – Onyx Black Pigment Ink

Other supplies:

WOW Embossing – Bright White Embossing Powder
Sizzix – Big Shot Die Cutting Machine
Scotch – 3M Foam Mounting Tape
Copic Markers